top of page

Setup Switches on the Radiomaster Boxer

Written by Justin Davis


There are 2 ways to setup Switches on your Radio.

  1. Setup inside the radio.

  2. using EdgeTx Companion Software. Download here : https://edgetx.org/

In this article we will do it the easy way using EdgeTx Companion. Using EdgeTx for

this process will help you get familiar with EdgeTx for your radio. We will also cover how to

flash your radio with the newest EdgeTx Firmware in an upcoming article.


Setting up switches on the Radiomaster Boxer radio controller can be a process, but with these step-by-step instructions, you can get your switches up and running in no time. Justin Davis is here to help you...

  1. Familiarize yourself with the switch layout on the Radiomaster Boxer. The switch layout can vary depending on the specific model you have, but you should be able to find this information in the manual that came with your controller.

  2. Connect the Radiomaster Boxer to your computer using a USB cable. Make sure the controller is in bootloader mode, which is usually achieved by holding down the Page and Exit buttons while turning the controller on.

  3. Download the EdgeTx Companion software from the official website: https://edgetx.org/

  4. Open EdgeTx Companion and select the "Firmware" tab. From there, select the "Radio" option and choose the Radiomaster Boxer from the drop-down menu.

  5. In the "Switches" section, select the switch you want to set up. You will be able to assign a function to each switch, such as arming the motors or toggling the camera.

  6. Once you have assigned functions to each switch, select the "Write to Radio" button to apply your changes to the controller.

  7. Disconnect the Radiomaster Boxer from your computer and test the switches to make sure they are working as expected. If you encounter any issues, double-check the steps above or consult the manual for troubleshooting guidance.


With these steps, you should now be able to successfully set up the switches on your Radiomaster Boxer.


Remember to regularly check for software updates from EdgeTx and the manufacturer to ensure your controller is always up-to-date and running smoothly.



If you need more help please join our Discord Group here : https://discord.gg/j9jVjvA


Article by Justin Davis of Drone Camps RC on Youtube. ® Rights Reserved 2023.

2 Comments


Robert George
Robert George
Feb 02, 2023

I appreciate this! I dont have this radio but I know it’s gonna be a highly recommended radio for new people.

Like
Replying to

I was suprised how much people love it. It took me a minute to catch on to this one honestly. I was blinded by my TX16S for so long. But I may try setting it up for some daily action soon.

Like
bottom of page