• QAV250 Mini FPV Quadcopter RTF - G10

    QAV250 Mini FPV Quadcopter RTF - G10

    Quick Overview
    The RTF (Ready to Fly) QAV250 airframe is a small yet fully FPV capable mini quad. Add your own receiver and go!


    The ready to fly (RTF) Lumenier QAV250 Mini FPV Quadcopter airframe is a small yet fully functional FPV quad deserving the QAV label. The QAV250 is a symmetric 250mm size airframe that accommodates 5" props. The 250mm is measured motor shaft to motor shaft diagonally.

    The airframe is designed to support 3s lipos such as the Lumenier 1300mah 3s with XT-60 connector.


    This RTF version is fully built, test flown and comes with everything to get you going. Just add your own receiver and setup your radio and you're good to go.
    A 2.5D CNC-ed G10 unibody main frame board
    Integrated power distribution board for ESCs and FPV flight electronics
    2 integrated LED strips (white and red) to aid LOS orientation
    Easy Lipo Access (suggested Lipo is a Lumenier 3s 1300mah)
    Support for 32mm board cams as well as cams in cases with mounting bracket
    Support for HD camera (such as the Mobius)
    Integrated and included Landing Gear reminiscent of the QAV500 CF Landing Gear

    Airframe: 170g (with PDB and LED boards)
    AUW: The QAV250 is flown with an AUW of around 540g (includes all flight electronics, FPV gear and Mobius HD camera).

    RTF Included Components and Parts

    A fully built and tested Lumenier QAV250
    5" Anti-Vibration neoprene tape
    1x Lumenier lipo strap
    8x Gemfan 5x3 4x CW, 4x CCW (Colors may vary)
    4x Lumenier FXC-1806 2300kv motors
    4x Lumenier 12amp NFET ESCs with SimonK firmware
    OpenPilot CC3D Flight Controller pre-programmed and test flown
    The airframe is professionally hand built and test flown for just $105

      Copyright 2019-20 ® All Rights Reserved by Drone Camps RC.