QAV 250 - FPV Bundle (Best Seller)
QAV250 Mini FPV Quadcopter Bundle - Carbon Fiber Edition
Made to order. - You add your own receiver, radio, battery, and go race!
The almost ready to fly Lumenier QAV250 Mini FPV Quadcopter - Carbon Fiber Edition airframe is a small yet fully functional FPV quad deserving the QAV label. The QAV250 is a symmetric 250mm size airframe that accommodates 5" props. The 250mm is measured motor shaft to motor shaft diagonally.
The airframe is designed to support 3s lipos such as the 1300mah 3s with XT-60 connector.
This version is fully built, test flown and comes with everything to get you going. Just add your own receiver and setup your radio and you're good to go.
A 2.5D CNC-ed Carbon Fiber unibody main frame board
Integrated power distribution board for ESCs and FPV flight electronics
2 integrated LED strips (white and red) to aid LOS orientation
Easy Lipo Access (suggested Lipo is a Lumenier 3s 1300mah)
Support for 32mm board cams as well as cams in cases with mounting bracket
Support for HD camera (such as the Mobius)
Integrated and included Landing Gear reminiscent of the QAV500 CF Landing Gear
Included Components and Parts
A fully built and tested Lumenier QAV250 - Carbon Fiber Edition
5" Anti-Vibration neoprene tape
1x Lumenier lipo strap
8x Gemfan 5x3 4x CW, 4x CCW (Colors may vary)
4x Lumenier FXC-1806 2300kv motors
4x Lumenier 12amp NFET ESCs with SimonK firmware
OpenPilot CC3D Flight Controller pre-programmed and test flown
The airframe is professionally hand built and test flown for just $105
Additional Suggested Parts (not included in the Bundle)
Lipo: Lumenier 1300mAh 3s
QAV250 CF Vibration Damping Camera Plate
FPV Gear: No FPV gear is included with the RTF.
See below for suggested 5.8gHz components
RC TX/RX: The RTF frame does not come with a RC transmitter or RX.
Any 2.4 Transmitter/RX or even LRS will work. Case: We sell a professional hard case for this airframe.