Happymodel Mobula6 Eco HD Zero Whoop Elrs
Sub250 Whoopfly16 Walksnail Avatar mini 1s Whoop 75mm
Ships from USA + Free Shipping in the USA 🇺🇸
Receiver : ELRS 2.4ghz
Condition : Flown, Tested, Working order, Mint condition.
This item was a review quad and flown by Justin Davis for a review. Flown a 3-4 times. No damage. Actually looks brand new.
Note : Missing the HD Zero Cable. If you have one great!
Still can connect to quad through Micro USB port. 👍🏻
Condition : New in Original Box.
Specifications:
- Brand Name: HAPPYMODEL & HDZERO CO-Brand
- Model: Mobula6 ECO 2024
- Frame wheelbase: 65mm
- Weight: 23.16 gram without battery
- Size: 81mm*81mm*45mm
- Compatible with 1S Lipo battery or Lihv battery
- Battery Plug: GNB A30
Motor:
- Mode: SE0702 KV28000
- Configu-ration:9N12P
- Stator Diamter:7mm
- Stator Length:2mm
- Shaft Diameter:Φ1mm
- Motor Dimension(Dia.*Len):Φ9.5mm*14mm
- Weight(g):1.49g
- No.of Cells(Lipo):1S only
Propellers:
- Materials: PC
- Inch: 31mm
- Pitch: 0.8 in
- Weight: 0.21g
- Mount hole diameter: 1mm
Flight controller:
- SuperX HD ELRS
- Betaflight 4.4.2 firmware ready
- Firmware target: CRAZYBEEF4DX
- MCU:STM32F411CEU6 (100MHz, 512K FLASH)
- Sensor: BMI270 or ICM42688P (SPI connection)
- Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
- Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
- Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update
- Bluejay ESC Firmware ready
- Built-in 5V 1A BEC
- Built-in voltage detection
- No betaflight analog osd chip
Onboard 4in1 ESC:
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support ESC-Configurator and BLHELI_S Suite configurator
- Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
- Default protocol: DSHOT300
- Battery Connector: GNB A30 (Compatible with BT2.0)
Onboard Serial ExpressLRS receiver:
- RF Frequency: 2.4GHz
- Antenna: enameled copper wire 31mm length
- Telemetry output Power: <12dBm
- Receiver protocol: CRSF
- Default firmware version: ExpressLRS V3.0.1
- The same hardware with Happymodel EP1 receiver
- Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through
HDZERO ECO VTX:
- Composite HD Video interface
- 1S-3S Input
- 25mW/200mW RF output
- 25.5×25.2 M2 soft mounting
- Antenna Retention
- 32.4×32.5mm (29x29mm inner)
- 4.5grames/4mm Thickness (w/o shielding)
HDZERO ECO Camera:
- Image Sensor : 1/3”
- Resolution: 720@60fps 4:3
- LENS: FOV D:150° H:120° V:98°
- Shutter: Rolling Shutter
- Net Weight: 1.6g (With Cable)
- Dimensions: L14mm*W14mm*H13mm
$195.00Price