Futaba 14SGA + R7008SB Airplane Mode
Futaba 14SGH 14-Channel 2.4GHz Heli Computer Radio
FASSTest tech. Flybarless gyro support. S.Bus programmability. Telemetry.
The 14SG has it all the latest features... and so much more!
Futaba proudly introduces the 14SG, the only 14-channel system with revolutionary 2.4GHz FASSTest technology. It's also compatible with Futaba FASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces.
The 14SG can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more. Heli pilots will prefer the 14SG's 3-axis gyro support — which makes the 14SG the perfect system for flybarless flight!
The innovations don't stop there. Turn the 14SG over, and you'll see the construction is as rock-solid as any other Futaba system. It's also very comfortable to use, thanks to rubber grips that help minimize flyer fatigue — an added bonus that pilots will appreciate.
Futaba 14SG 14 Channel 2.4GHz Computer Radio System on Mode 2 with the R7008SB Receiver. This package does not include any servos.
This is the Mode 2 version-the left stick controls throttle and rudder and the right stick controls elevator and ailerons.
This is the helicopter version which will default to heli settings when powered up.
- Futaba 14SG 14 Channel 2.4GHz Computer Radio System on Mode 2
- R7008SB Receiver
- 6V 1800mAh NiMH Transmitter Battery
- Instruction Manual
- LiFe Spacer for optional FT2F2100B/FT2F1700B battery pack
- Battery Charger
- Neck Strap
- Switch Harness
DetailsAbout the 14SG:
Channels: 12 proportional, 2 switched
Compatible with FASSTest, FASST and S-FHSS protocols
FASSTest telemetry – compatible with Futaba telemetry sensors (sold separately)
Free user-updatable software
10-character user naming
10-character model naming
Airplane, helicopter and glider programming
Large, 1.75” x 3” backlit LCD screen with 128 x 64 resolution
SD Card compatibility for external model memory and software updates (SD: 32MB-2GB; SDHC 4GB-32GB)
Left and right assignable slider switches
Two assignable rotary knobs
Six assignable three-position switches
One assignable momentary two-position switch
One assignable two-position switch
Comfortable rubber grips on the sides and back
Wide top switch spacing
Adjustable stick tension
Dual ball bearing gimbals
4 vibration warning types
Home/Exit; User Menu/Servo Monitor buttons
Audio earphone jack (for telemetry alarms)
6V 1800mAh NiMH battery pack
User stick calibration
Servo speed adjust
5 programmable mixes
V-tail, Ailvator, winglet, motor mixing
Logic switch (condition switch only)
Internal programmer for S.Bus servos
Servo monitor (neutral and moving tests)
2 count up/countdown timers
Quick model select