HappyModel BNF 1S Mobula7 Analog Whoop, ELRS
HappyModel BNF 1S Mobula7 Analog Whoop
Ships from USA + Free Shipping in the USA 🇺🇸
Super fun 75mm Analog whoop with ELRS Spi built in Rx.
**Does NOT come with 1S 450mah Batteries
This whoop is super fun, smooth, and will freestyle like a pro!
Great for beginners. Compatible with Analog Fpv Goggles.
Great fun backyard flier. Flies on 1S 330mah batteries.
ELRS Spi Built in receiver
Condition : Flown, Tested, Working order, Mint condition.
This item was a review quad and flown by Justin Davis for a review.
Flown a 3-4 times. No damage. Looks brand new.
Comes in Original Box.
Only Happymodel Mobula7 Pnp whoop at this price.
Description
Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoop season. This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come with a new unibell design, uses a 1.5mm shaft, and includes a PCB bottom plate, which means high efficiency, and much more reliability.
The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.
New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event.
- X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx
- VTX Power up to 400mw
- ELRS V2.0 Support
- NEW RS0802 KV20000 motors
- Caddxfpv ANT 1/3 CMOS 1200TVL Camera
- Smooth and powerful
- Compatible for 1S Lipo/LIHV
- Recommend 1S 450mah/550mah/650mah battery(Not include)
Specifications
- Item Name: HappyModel BNF 1S Mobula7 Analog Whoop - Choose Receiver Type
- Wheelbase: 75mm
- Size: 99mm x 99mm x 40mm
- Weight: 24g
- Receiver option:
-2.4G ELRS SPI
-SPI Frsky D8/D16 not compatible with EMAX E6 radio
-TBS version(with external TBS CRSF NANO RX)
Motor
- Mode: RS0802 KV20000
- Configu-ration:9N12P
- Stator Diamter:8mm
- Stator Length:2mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.xLen):Φ10.5mm x 13.5mm
- Weight(g):2.0g
- No.of Cells(Lipo):1S only
Propellers
- Weight:0.24g
- Material:PC
- Pitch:1 inchProps Dia:40mm
- Center Thickness:5mm
- Center Hole Dia:1.5mm
Flight Controller
- X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
- X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
- X12 PNP V1.0 flight controller with external TBS CRSF Nano receiver Target: CRAZYBEEF4DX
- X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)
- Mount hole size: 25.5mm x 25.5mm
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw
- Built-in ExpressLRS 2.4G,Frsky D8/D16
- Built-in voltage detection
- Built-in current sensor
Onboard 4in1 ESC
- Power supply: 1S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: Z_H_30_REV16_7.HEX
- Default protocol: DSHOT300
- Support Bluejay firmware
- When use Blujay firmware with 48khz, should set startup power to 1100/1200
Receiver
- ExpressLRS 2.4GHz
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V2.0
- RF Frequency: 2.4GHz
- Antenna : SMD antenna
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Compatible with ExpressLRS V2.0 TX Module
- Couldn’t flash separately ExpressLRS firmware
- Onboard 5.8 OPENVTX
- Firmware version: OPENVTX
- Smartaudio v2.1
- PIT Mode support
- RCE Mode support
- Channels:48ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v):650ma~1000ma
- CaddxFPV ANT Camera
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14x14mm(with bracket to 19x19mm)
- Wide Power Input: DC 3.7-18V
- Weight: 2g (N.W.)
Includes
- 1x HappyModel BNF 1S Mobula 7 Whoop